JCB35T2

Power: input_100-240VAC, 50/60 Hz; The output power is 72W in the rated state, and the output power is 180W in the working mode

Power point light: Yes

Actuator interface: Maximum 4 channels, 6-pin ET bend plug

Handset interface: 1 channel, 10-pin crystal bend insert

Battery interface: 1 channel, 4-pin ET bend plug (output 30uA- when push rod does not operate)

Standby power: Max. 1W (230V)

Color: Grey

Control idea: H-bridge, the service life exceeds 20000 cycles (No relay noise)

Duty cycle: 2/18 @ 25°C; on/off continuous use (180W at 25°C for 120 seconds)

Weight:0.8kg

Actuator compatibility: signal switches(for signal switches)

Battery management: battery power can be turned off at low voltage, battery internal charge and discharge management

IP grade: Max. IPX6

Operate: synchronous drive (no feedback)

Maximum current: 10A total for all channels

Power management: voltage management can ensure maximum power operation and limit output maximum power

Safety system: switching power supply thermal protection ,overcurrent protection

Position: Compatible with actuators equipped with special mounting brackets; bed frame

(via screws, sliding brackets)

Line card: all ports have