JCB35T

Power supply：Input: 100-240 VAC, 50/60 Hz, Output 58W in the rated state, 180W in the working state

Power indicator: Yes

Actuator plug：Max. 4channels, 4 pin DIN plug

Handset plug：1 channel, 9 pin DIN plug

Battery plug：1 channel, 6 pin DIN plug(When there is no action of actuator -output 1mA)

Standby power：Max. 1W（230V）

Color：Gray

Control Method：H-bridge(no relay noise), the life-time exceeds 20,000 cycles.

Duty Cycle：2/18min @ 25°C; on/off continuous use(180W at 25°C for 120 seconds）

Net Weight：0.6kg

Compatibility：Support standard actuator and column (inner limit switch)

Battery Management: turning off at low voltage; charging and discharging management

IP grade：Max. IPX6

Operation：Synchronous drive（no feedback）

Maximum current: total 10A for all channels

Power supply management：Voltage management ensures maximum working power and limit output power up to 200W

Safety system: switching power supply thermal protection

overheat protection

Installation: Compatible with the actuators equipped with special mounting brackets, bed frame (fixed by screws)

Cable cover: all ports have